GFM 132
A hemispherical-pattern boundary layer microphone with a computer-designed base plate intended to avoid comb filtering. It suits live and stage recording, orchestra pits, speaker desks and bass drum placement.
- Boundary layer microphone with hemispherical polar pattern
- Computer-designed plate shape avoids comb filter effects
- 20 Hz to 20 kHz frequency range
- Transformerless circuit, 48 V phantom power
- 10 dB attenuation switch
- Supplied with wooden case and wind screen
Fotod
8Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli GFM 132, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The GFM 132 is a pressure-transducer boundary layer microphone with a hemispherical polar pattern that stays the same across frequency. Its base plate has a shape derived from computer simulation, intended to avoid the comb-filter coloration that circular, square or rectangular plates can produce. The response is smooth for all angles of incidence, with a slight rise in the upper frequencies to help distant sources sound clear.
Typical uses include live recording in opera-house orchestra pits, theatres and on stage, as well as speaker desks, and placement inside a bass drum. Diffuse-field and free-field responses are identical, and as a pressure transducer it is insensitive to structure-borne noise and air movement. The back has non-slip pads for horizontal or inclined use, plus holes for wall suspension.
The microphone is powered by 48 V phantom power through a balanced XLR 3 F connector and uses transformerless circuitry. A 10 dB attenuation switch next to the connector protects the following input from overload. It ships with a wooden case and a wind screen.
Tehnilised andmed
- Bränd
- Neumann
- Mudel
- GFM 132
- Kategooria
- Stuudio › Mikrofonid
Audio
- Acoustical operating principle
- Pressure transducer
- Directional pattern
- Hemispherical
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 18 mV/Pa
- Equivalent noise level, A-weighted
- 14 dB-A
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 70 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 80 dB
- Maximum SPL for THD 0.5%
- 137 dB
- Maximum SPL for THD 0.5% with preattenuation
- 147 dB
- Pre-attenuation
- 10 dB switch
Outputs
- Rated impedance
- 50 Ohms
- Rated load impedance
- 1000 Ohms
- Maximum output voltage
- 10 dBu
Connectivity
- Matching connector
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 2 mA
Physical
- Diameter
- 213 mm
- Length
- 168 mm
- Weight
- 460 g
In the box
- Included
- Wooden case, wind screen