2MR Black LVB 250
Moving-magnet phono cartridge with a nude Shibata stylus on a boron cantilever and a Nano Tube suspension. Its narrow housing suits low-profile tonearms such as Rega, for listeners upgrading from the 2M Black.
- Nude Shibata diamond stylus on a boron cantilever
- Nano Tube suspension based on carbon nanotube filler
- Quad-coil system with silver-plated OFC wire
- Narrow housing for low-profile tonearms such as Rega
- 5 mV output, 47 kOhm recommended load
- Recommended tracking force 1.6 g
Fotod
5Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli 2MR Black LVB 250, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The 2MR Black LVB 250 builds on the 2M Black moving-magnet design. It swaps in a boron cantilever, which is stiff and light, and a nude Shibata diamond stylus with a slim, highly polished profile that contacts a wide area of the groove wall.
The suspension uses a Nano Tube rubber compound filled with multi-wall carbon nanotubes, intended to damp better and improve overall performance. The coil system is a quad-coil layout with split pole pins and silver-plated OFC wire.
The body is cut narrow for low-form-factor tonearms such as those on Rega turntables. It mounts with two screws on a half-inch mount and needs no spacers or modifications under the tonearm. A replacement stylus (Stylus 2M Black LVB 250) is listed.
Video
Tehnilised andmed
- Bränd
- Ortofon
- Mudel
- 2MR Black LVB 250
- Kategooria
- DJ-tehnika › Helipead ja nõelad
Stylus and cantilever
- Stylus type
- Nude Shibata diamond
- Stylus tip radius
- r/R 6/50 µm
- Cantilever material
- Boron
- Stylus colour
- Black
- Replacement stylus
- Stylus 2M Black LVB 250
Electrical
- Output voltage at 1 kHz, 5cm/sec
- 5 mV
- Channel separation at 1 kHz
- > 27 dB
- Channel balance at 1 kHz
- < 1 dB
- Frequency response 20 Hz - 20 kHz
- + 2 / - 1 dB
- Internal impedance, DC resistance
- 1.2 kOhm
- Internal inductance
- 630 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 47 kOhm
Coil system
- Coil system
- Quad-coils with split pole pins and silver-plated OFC Coil Wire
- Coil wire material
- Silver-plated OFC Coil Wire
Tracking
- Tracking ability at 315 Hz
- 80 µm
- Compliance, dynamic, lateral
- 22 µm/mN
- Tracking force range
- 1.5-1.7 g (15-17 mN)
- Tracking force, recommended
- 1.6 g (16 mN)
- Tracking angle
- 20°
Physical
- Cartridge weight
- 6 g
- Cartridge colour
- Black
- Mounting type
- Half inch mount