MC Vertex
Moving-coil phono cartridge with a Vertex diamond stylus on a laser-polished solid diamond cantilever, in an SLM titanium body with DLC coating. It is aimed at high-end analogue systems and handles both stereo and mono records.
- Vertex diamond stylus, r/R 4/110 μm
- Laser-polished solid diamond cantilever
- SLM titanium body with DLC coating
- High-purity silver coils, non-magnetic armature
- Output 0.3 mV, channel separation 30 dB
- Recommended tracking force 2.5 g
Fotod
8Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli MC Vertex, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The MC Vertex is a moving-coil cartridge built around a newly developed Vertex diamond stylus. The stylus combines a 4 μm scanning radius with a 110 μm contact radius, which spreads contact force over a larger area of the groove wall. It is mounted in a solid diamond cantilever that is laser-cut at the interface and laser-polished.
The body and internal core are made from titanium using selective laser melting, with an intentional internal cavity for damping and a black DLC finish. Logos are laser-engraved into the titanium. Resonance is controlled by an updated Wide Range Damping system, in which a platinum disc sits between two in-house rubber compounds.
The generator uses a non-magnetic armature, precision-wound high-purity silver coils and an optimised magnet configuration. Output is 0.3 mV at 1 kHz, with 30 dB channel separation. The cartridge uses a half-inch mount, and the recommended tracking force is 2.5 grams.
Video
Tehnilised andmed
- Bränd
- Ortofon
- Mudel
- MC Vertex
- Kategooria
- DJ-tehnika › Helipead ja nõelad
Electrical
- Output voltage at 1 kHz, 5 cm/sec
- 0.3 mV
- Channel balance at 1 kHz
- 0.1 dB
- Channel separation at 1 kHz
- 30 dB
- Frequency response 20 Hz - 20 kHz
- +/-1 dB
- Internal impedance, DC resistance
- 19 Ω
- Recommended load impedance
- >100 Ω
- Coil system
- High-purity silver coil wire
Stylus and cantilever
- Stylus type
- Vertex Diamond
- Stylus tip radius
- r/R 4/110 μm
- Cantilever material
- Laser Polished Solid Diamond
Mechanical
- Compliance, dynamic, lateral
- 9 μm/mN
- Recommended tracking force
- 2.5 grams
- Tracking angle
- 23°
Physical
- Cartridge body material
- SLM Titanium and DLC Coating
- Mounting type
- Half inch mount