SPL PQ· Eelvõimendid ja välisseadmed
Dual-mono, two-channel analogue mastering equaliser with five fully parametric bands per channel, each switchable between constant and proportional Q. It runs on 120V rail technology and suits mastering engineers who need repeatable, precise EQ.
- 2 channels x 5 fully parametric bands
- Constant Q / proportional Q per band
- Up to +/-20 dB, 1/4 Gain switch for +/-5 dB
- 41-step detented potentiometers
- Auto Bypass, Link, balanced XLR, +/-60 V operation
Fotod
6Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli SPL PQ, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The PQ provides two independent channels of five parametric bands each (LF, LMF, MF, MHF, HF), with wide frequency overlap so a problem area can be handled with two bands. Each band cuts or boosts by up to 20 dB, and a 1/4 Gain switch narrows that range to +/-5 dB for fine corrections. Stepped potentiometers with 41 detents make settings easy to recall.
Every band has a Q control and a button that switches between constant Q and proportional Q. In proportional mode the available gain falls from +/-20 dB at the narrowest bandwidth to +/-2.8 dB at the widest. Each band and each channel can be switched on and off.
The centre section has an Auto Bypass with an adjustable interval, which alternates between processed and original signal automatically for objective comparison. A Link function ties the band on/off and Q-mode buttons of both channels together. Audio runs through balanced XLR connections and the analogue stages operate at +/-60 V, with an internal linear power supply and toroidal transformer.
Tehnilised andmed
- Bränd
- SPL
- Mudel
- PQ
- Kategooria
- Stuudio › Eelvõimendid ja välisseadmed
Bands
- Bands per channel
- 5 (LF, LMF, MF, MHF, HF)
- LF range
- 10 Hz – 330 Hz
- LMF range
- 33 Hz – 1 kHz
- MF range
- 128 Hz – 4.1 kHz
- MHF range
- 310 Hz – 10.2 kHz
- HF range
- 760 Hz – 24 kHz
- Boost/cut per band
- up to 20 dB (+/-5 dB with 1/4 Gain)
- Potentiometer steps
- 41
Inputs
- Analog inputs
- XLR (balanced)
- Maximum input level
- 32.5 dBu
- Input impedance
- 20 kΩ
- Common mode rejection
- -82 dBu
Outputs
- Analog outputs
- XLR (balanced)
- Maximum output level
- 32.5 dBu
- Output impedance
- 75 Ω
Audio
- Frequency range (-3 dB)
- 10 Hz – 100 kHz
- THD & N (+30 dBu, 1 kHz)
- 0.0005 %
- Noise (A-weighted)
- -94.3 dBu
- Dynamic range
- 135 dB
Power
- Operating voltage, analog audio
- +/- 60 V
- Operating voltage, relays and LEDs
- + 12 V
- Mains voltage
- 230 V AC / 50 Hz; 115 V AC / 60 Hz (selectable)
- Fuse for 230 V
- T 3.15 A
- Fuse for 115 V
- T 6.3 A
- Power consumption
- max. 100 VA
Physical
- Dimensions (W x H x D)
- 482 x 177 x 300 mm
- Unit weight
- 15.2 kg
- Shipping weight
- 17.8 kg