Operation Overlord
Analog stereo-capable overdrive/distortion pedal with a footswitchable Boost mode, active three-band EQ and a dry blend. It suits guitar, bass, keyboards and other electronic instruments.
- Analog overdrive/distortion with three JFET gain stages
- Silent footswitchable Normal and Boost modes
- Active Treble, Mid and Bass plus Dry blend
- 3-position input level switch for guitar, bass, keys
- Stereo L/R 1/4" inputs and outputs
- 9.6VDC power adapter included
Fotod
7Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli Operation Overlord, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The Operation Overlord is an analog overdrive/distortion pedal covering mild drive through to saturated tones. In Normal mode the signal passes through three JFET gain stages, aimed at a tube-amp-like response. Boost mode, switched silently by its own footswitch, adds a classic pedal-style overdrive circuit ahead of the JFET stages.
Tone shaping comes from active Treble, Mid and Bass controls, a Dry knob that blends the unprocessed signal back in, and separate Gain, Boost and Volume knobs. A three-position input level switch matches the pedal to the output of guitar, bass, keyboards or other instruments.
The pedal has left and right 1/4" input and output jacks and can be used with mono or stereo inputs, with two independent distortion channels for stereo rigs. It uses buffered bypass and runs from the supplied 9.6VDC 200mA adapter. Red and blue LEDs show whether the effect and Boost mode are engaged. Released in 2017, it was discontinued in 2025.
Video
Tehnilised andmed
- Bränd
- Electro-Harmonix
- Mudel
- Operation Overlord
- Kategooria
- Efektid ja pedaalid
Audio
- Circuit
- Analog
- Bypass
- Buffered Bypass
- Audio
- Mono
- Gain stages (Normal mode)
- Three JFET stages
- EQ
- Active Treble, Mid and Bass
Controls
- Knobs
- Vol, Treble, Mid, Bass, Dry, Boost, Gain
- Input level switch
- 3-position
- Footswitches
- Bypass (red LED), Boost (blue LED)
- Modes
- Normal and Boost, silent footswitchable
Inputs
- Input jacks
- Left and right 1/4"
Outputs
- Output jacks
- Left and right 1/4"
Power
- Power supply
- 9.6VDC-200mA power adapter included
- Current draw
- 90mA
Physical
- Dimensions
- 4.75 x 4.13 x 2.25 in
In the box
- Included
- Power adapter
- UPC
- 683274011875