
Wave:3 MK.2
USB-C condenser microphone with a cardioid pattern, onboard DSP, Clipguard 2.0 and VST insert support through the free Wave Link software. It suits streamers, podcasters and anyone who wants processed vocals with little setup.
- 16 mm condenser capsule, cardioid pattern
- Onboard DSP and Clipguard 2.0 via Wave FX Processor
- VST inserts through free Wave Link software
- Dial with LED ring, Auto Gain and tap-to-mute
- Zero-latency monitoring via 3.5 mm headphone jack
- USB-C connection, 24-bit / 48 kHz
Fotod
8Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli Wave:3 MK.2, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
Wave:3 MK.2 is a USB condenser microphone built around a 16 mm capsule with a cardioid pickup and an internal pop filter. A Wave FX Processor runs DSP effects and Clipguard 2.0 distortion protection inside the microphone, so the processing applies in any app and can be heard with no delay through the headphone output.
Controls sit on the mic itself. A multifunction dial with an LED ring cycles through input gain, Voice Tune, headphone volume and monitor mix, and a long press starts Auto Gain calibration. Tap-to-mute and a 3.5 mm stereo headphone jack are included, with support for headphones up to 250 Ω.
The mic connects to a computer over USB-C and also works with phones and tablets that support USB Audio Class 2.0, though VST effects do not carry over to those devices. It works without software, but the free Wave Link app for Windows and macOS is needed to edit hardware effects, add VST inserts and adjust mixes. A desk stand and 5/8" and 3/8" thread adapters are supplied.
Video
Tehnilised andmed
- Bränd
- Elgato
- Mudel
- Wave:3 MK.2
- Kategooria
- Stuudio › Mikrofonid
Audio
- Capsule
- 16 mm condenser (integrated JFET)
- Polar pattern
- Cardioid
- Frequency response
- 70 - 20000 Hz
- Sample rate
- 48 kHz
- Resolution
- 24 bit
- Sensitivity
- -20 dBFS typical at 1 kHz
- Max SPL
- 130 dBSPL typical at 1 kHz
- Dynamic range
- 110 dB
- Pop filter
- Internal
Processing
- Processor
- Wave FX Processor
- Anti-distortion
- Clipguard 2.0
- Onboard DSP
- Yes
- VST Inserts
- Yes (via Wave Link)
Controls and monitoring
- Controls
- Multifunction dial, tap to mute, Auto Gain, LED ring
- Headphone output
- 3.5 mm stereo jack
- Headphone impedance support
- Up to 250 Ω
Connectivity
- Connection
- USB-C (USB 2.0 HS)
- Mobile compatibility
- Phones and tablets with USB Audio Class 2.0 (UAC2)
Physical
- Weight with desk stand
- 570 g | 1.26 lbs
- Weight without desk stand
- 250 g | 0.55 lbs
- Dimensions with desk stand
- 213 x Ø100 mm | 8.4 x Ø3.9 in
- Dimensions without desk stand
- 46 x 85 x 167 mm | 1.8 x 3.3 x 6.6 in
- Mounting thread
- 1/4-inch, with 5/8-inch and 3/8-inch adapters
Software
- Software
- Wave Link (free download)
- Windows
- Windows 11 or newer
- macOS
- macOS 14.2 or newer
In the box
- Included
- Wave:3 MK.2, desk stand, USB-C cable (250 cm | 98 in), 5/8" and 3/8" adapter