FINEO FO 8
Compact passive 2-way mid/high loudspeaker with an 8-inch woofer and 1-inch compression driver in a slim trapezoidal MDF cabinet. Aimed at fixed installations such as speech and near-field reinforcement, and it can be paired with S112, S118 or S218 subwoofers.
- Passive 2-way, 8" woofer plus 1" compression driver
- 200 W RMS / 400 W program / 800 W peak
- Max. SPL 119 dB peak, sensitivity 91 dB (1 W/1 m)
- Rotatable constant-directivity horn, 80° x 60°
- 2 x NL4 Speakon (input and parallel output)
- Ball impact resistant (DIN 18032-3), 11.0 kg
Fotod
8Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli FINEO FO 8, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The FINEO FO 8 is a passive, bass-reflex, two-way mid/high unit for installation use. It combines an 8" Sica cone driver with a 1.75" voice coil and a 1" Sica compression driver with a 1" voice coil, split at 3.2 kHz with 18 dB/oct. high-pass and low-pass filters. Power handling is 200 W RMS, 400 W program and 800 W peak, with a maximum peak SPL of 119 dB and a nominal impedance of 8 ohms.
The high-frequency section uses a BEM-optimised constant-directivity horn that offers 80° x 60° coverage. The horn can be rotated, so the cabinet can stand upright or lie on its side, or the horizontal and vertical dispersion can be changed. This helps in small or architecturally awkward rooms. A PTC circuit protects the compression driver. The cabinet is certified for ball impact resistance under DIN 18032-3 and is intended only for dry indoor areas.
Connection is through two NL4 Speakon sockets, one input and one parallel output. The cabinet has M8 and M4 rigging points, including a VESA 100 x 100 mm pattern. DSP presets and filter sheets are published for several amplifier and processor platforms, and U-brackets, wall mounts and other accessories are available.
Video
Tehnilised andmed
- Bränd
- HK Audio
- Mudel
- FINEO FO 8
- Kategooria
- Live-heli › PA-kõlarid
Audio
- Concept
- Passive 2-way mid/high unit
- Cabinet principle
- Bass reflex
- Nominal impedance
- 8 Ohms
- Max. SPL average
- 116 dB
- Max. SPL peak
- 119 dB
- Sensitivity 1 W/1 m
- 91 dB
- Crossover frequency
- 3.2 kHz
- Frequency range -6 dB
- 72 Hz - 20 kHz
- Frequency range -10 dB
- 69 Hz - 20 kHz
- Dispersion angle -6 dB (H x V)
- 80° x 60°
Power handling
- Power handling RMS
- 200 W
- Power handling program
- 400 W
- Power handling peak
- 800 W
Components
- Low frequency
- 1 x 8" Sica cone speaker with ferrite magnet and 1.75" voice coil
- High frequency
- 1 x 1" Sica compression driver with ferrite magnet and 1" voice coil
- Crossover
- High pass: 18 dB/oct., Low pass: 18 dB/oct.
- High frequency protection
- PTC circuit
- Horn
- BEM optimized constant directivity horn, rotatable
Connectivity
- Input
- 1 x NL4 Speakon
- Output/parallel output
- 1 x NL4 Speakon
- Pin assignment
- 1+/- (input/parallel output), 2+/- (looped through)
Physical
- Cabinet material
- MDF
- Cabinet surface
- 1-component-acrylic enamel
- Color
- Jet black (RAL 9005), Signal white (RAL 9003) or special color according to catalog
- Front grille
- Steel front grille with anticorrosive coating and backed acoustic foam
- Rigging
- 2 x M8 on the side, 2 x M8 bottom/lid, 1 x M8 on the back, 4 x M4 on the back (VESA MIS-D 100 x 100 mm)
- Dimensions (W x H x D)
- 26.3 x 47.4 x 26.3 cm (10-11/32 x 18-21/32 x 10-11/32 inch)
- Weight
- 11.0 kg (24.3 lbs)
Certifications
- Ball impact resistance (DIN 18032-3)
- certified (MPA Uni Stuttgart)
- IP protection class (EN 60529)
- not specified (installation only in dry indoor areas)
Software
- Amp presets
- Lab.gruppen IPX Series, LEA Professional Sharkware
- Filter sheets
- Lab.Gruppen IPX Series, Biamp Tesira, BSS, Lab.Gruppen Lake, Linea Research, Marani, Powersoft, QSC Q-SYS, Ram Audio, Symetrix