Mars 300 Pro
Dual-HDMI wireless video transmitter and receiver set with a stated range of up to 100 m (300 ft) and 0.1 s latency on 5 GHz. It suits camera operators and crews who need to send a feed to a monitor or phones on set.
- Up to 300 ft (100 m) transmission range
- 0.1 s transmission latency
- HDMI input plus HDMI loop-out on the transmitter
- 5 GHz, OFDM, 20 MHz bandwidth
- Power via USB-C, DC or NP-F battery
- HollyView app: 3D LUTs, peaking, zebra, zoom
Fotod
5Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli Mars 300 Pro, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The Mars 300 Pro sends HDMI video wirelessly from a camera to a receiver over 5 GHz using OFDM modulation in a 20 MHz channel. Range is stated as up to 300 ft (100 m), with 0.1 s transmission latency. The transmitter has an HDMI input and an HDMI loop-out for a local monitor, and the receiver has an HDMI output.
A side OLED display shows signal strength, remaining battery and the active channel, and it stays facing the user in vertical or horizontal mounting. Menu navigation and settings are handled with a single thumbwheel switch. Both units can run from USB-C at 5V/2A, from a DC supply, or from an NP-F battery. The transmitter uses two RP-SMA antenna connectors.
The HollyView app on a phone works as an extra monitor and adds 3D LUTs, focus peaking, zebra pattern and zoom. Firmware can be updated through the app. The set comes in three packages: Standard with built-in transmitter antennas, Enhanced with three detachable transmitter antennas and an anti-impact design, and a single transmitter.
Video
Tehnilised andmed
- Bränd
- Hollyland
- Mudel
- Mars 300 Pro
- Kategooria
- Live-heli › Juhtmevabad süsteemid
Transmitter inputs and outputs
- HDMI input
- HDMI IN (Type A Female)
- HDMI loop-out
- HDMI LOOPOUT (Type A Female)
- Antenna interfaces
- 2 (RP-SMA Male)
- USB port
- USB-C
Receiver inputs and outputs
- HDMI output
- HDMI OUT (Type A Female)
- USB port
- USB-C
Wireless
- Frequency
- 5GHz
- Modulation
- OFDM
- Bandwidth
- 20MHz
- Transmission range
- Up to 300ft (100m)
- Transmission latency
- 0.1s
- Transmitter TX power
- Maximum 21dBm
- Receiver RX sensitivity
- –80dBm
Video formats
- Transmitter HDMI formats
- 480p60, 576p50, 720p50/59.94/60, 1080i50/59.94/60, 1080p23.98/24/25/29.9/30, 1080p50/59.94/60
- Receiver HDMI formats
- 480p60, 576p50, 720p50/60, 1080i50/60, 1080p24/25/30, 1080p50/60
Power
- USB-C supply (both units)
- 5V/2A
- Battery supply (both units)
- 5-12V DC
- Transmitter power consumption
- <11W
- Receiver power consumption
- <4W
Physical
- Transmitter weight
- 136g (4.8oz)
- Receiver weight
- 128.5g (4.5oz)
- Dimensions (L x W x H, each unit)
- 110mm x 61mm x 22.8mm (4.3" x 2.4" x 0.9"), battery plate excluded
- Display
- Side OLED display
Software
- Monitoring app
- HollyView
- App functions
- 3D LUTs, focus peaking, zebra pattern, zooming
- Firmware update
- In-app via HollyView
In the box (Standard)
- Contents
- Transmitter x1, Receiver x1, Expansion Accessory x1, Cold Shoe x1, USB-A to USB-C Cable x1, User Manual x1
In the box (Enhanced)
- Contents
- Transmitter x1, Receiver x1, Transmitter Antenna x3, Expansion Accessory x1, Cold Shoe x1, USB-A to USB-C Cable x1, User Manual x1
In the box (1 Transmitter)
- Contents
- Transmitter x1, Expansion Accessory x1, Cold Shoe x1, USB-A to USB-C Cable x1, User Manual x1