TD 1500
Fully manual belt-drive turntable with a suspended subchassis, a tribute to the 1965 TD 150. It ships with a TP 150 tonearm and an Ortofon 2M Bronze cartridge, and has both RCA and balanced XLR outputs, for vinyl listeners who want a classic-style deck.
- Suspended subchassis on three conical springs
- Springs adjustable from above through platter openings
- Belt drive, 1.4 kg / 22 mm die-cast aluminium platter
- Encoder-monitored electronic DC motor speed control
- TP 150 tonearm, 14 g effective mass, SME connector
- Ortofon 2M Bronze fitted; RCA and XLR outputs
Fotod
8Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli TD 1500, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The TD 1500 is a fully manual turntable that revives the suspended subchassis layout of the TD 150. Three conical springs isolate the platter and tonearm board from the motor and plinth, and the springs can be adjusted from above through openings in the platter. A polished precision belt drives a 1.4 kg, 22 mm thick die-cast aluminium platter.
A DC motor is monitored by an incremental encoder, which corrects speed deviations such as those caused by a record brush. The TP 150 tonearm has an effective mass of 14 grams, adjustable height (VTA) and azimuth, and a standard SME connector. Anti-skating is set with a movable weight in the tonearm base, connected by a nylon thread running over a ruby bearing.
The turntable comes with an Ortofon 2M Bronze moving magnet cartridge with a nude Fine Line diamond stylus. Signal leaves through unbalanced RCA outputs or balanced XLR outputs; the XLR route is intended for use with a suitable moving coil cartridge.
Video
Tehnilised andmed
- Bränd
- Thorens
- Mudel
- TD 1500
- Kategooria
- Hi-Fi ja kodune heli › Plaadimängijad
Turntable
- Type
- Fully manual turntable
- Drive
- Belt drive with polished precision belt
- Motor
- Electronically controlled DC motor
- Speed control
- Incremental encoder monitoring
- Chassis
- Suspended subchassis with three conical springs
- Spring adjustment
- From above through openings in the platter
Platter
- Material
- Die-cast aluminum
- Weight
- 1.4 kg
- Thickness
- 22 mm
Tonearm
- Model
- TP 150
- Effective mass
- 14 g
- Adjustments
- Height (VTA) and azimuth
- Headshell connector
- Standard SME
- Anti-skating
- Movable weight in tonearm base, nylon thread over ruby bearing
Cartridge
- Pre-installed cartridge
- Ortofon 2M Bronze
- Cartridge type
- MM
- Stylus
- Nude Fine Line diamond
Outputs
- Unbalanced output
- RCA
- Balanced output
- XLR
Physical
- Width
- 42 cm
- Height
- 16.1 cm
- Length
- 36 cm
- Weight
- 7.9 kg