SOLO/610
All-tube mono mic preamplifier and DI box based on the Putnam 610 console mic amp circuit. It suits project studios, desktop setups and stage use where a portable tube front end for mics and instruments is needed.
- Single-channel all-tube preamp based on the Putnam 610 console
- Mic input with selectable 450 ohm or 1.6 kilohm impedance
- DI input with selectable 2.2 megohm or 50 kilohm impedance
- Up to 61 dB maximum gain
- DI Thru and Mic/Line level outputs
- Steel chassis, hand-built in the USA
Fotod
5Kuulutused
Sellel mudelil pole veel kuulutusi
Kui keegi müüb mudeli SOLO/610, ilmuvad kuulutused ja müügiajalugu siia.
Müü samasuguneKirjeldus
The SOLO/610 is a single-channel tube preamp modelled on the mic amplifier of the Putnam 610 console. It takes a microphone or an instrument and adds the tube colour associated with that circuit. Gain, Level and Impedance controls let the user shape the tone, and the steel chassis is built for use in a control room, recording room, on a desktop or on stage.
The mic input offers two impedance settings (450 ohms or 1.6 kilohms), and the DI input offers 2.2 megohms or 50 kilohms. The DI section provides a Thru output as well as a Mic/Line level output. A 12AX7 and a 12AT7 tube make up the gain stage, with up to 61 dB of maximum gain.
The unit is hand-built in the USA and covered by a one-year limited warranty. Its dimensions are 14 x 5.75 x 5 inches and it weighs 9 lbs.
Video
Tehnilised andmed
- Bränd
- Universal Audio
- Mudel
- SOLO/610
- Kategooria
- Stuudio › Eelvõimendid ja välisseadmed
Inputs
- Mic input impedance
- Selectable 450 ohms (Lo-Z) or 1.6 kilohms (Hi-Z)
- DI input impedance
- Selectable 2.2 megohms (Lo-Z) or 50 kilohms (Hi-Z)
- Maximum mic input level
- -12 dBu, 1.0% THD+N Ratio
- Maximum instrument input level
- +4 dBu, 1.0% THD+N Ratio
Outputs
- DI outputs
- Thru and Mic/Line level output
Audio
- Maximum gain
- 61 dB
- Maximum gain, mic input
- 55 dB (1.6K ohm input), 60 dB (450 ohm input)
- Maximum gain, instrument input
- 37 dB
- Mic/Instrument in frequency response
- 20 Hz to 20 kHz, +/- 0.1 dB
- Output load impedance response
- 20 Hz to 20 kHz +/- 1 dB
- Tube complement
- (1) 12AX7, (1) 12AT7
- Controls
- Gain, Level and Impedance selection
Physical
- Length
- 14"
- Width
- 5 3/4"
- Height
- 5"
- Weight
- 9 lbs.
- Chassis
- Steel
General
- Channels
- Mono
- Warranty
- 1-year limited
- Origin
- Hand-built in USA